Ardex

ARDEX WPM 750 Undertile Sheet Membrane

$1,890.00 AUD
$1,890.00 AUD
Shipping calculated at checkout.

Prices shown exclusive of GST.

Online stock available
ARDEX WPM 750 is a fleece-lined, heat-welded sheet membrane designed for internal wet areas such as bathrooms and showers. It provides a consistent membrane thickness and forms a fully welded
Calculating estimated delivery

H2O AI Product Support

Technical and product guidance for the item you’re viewing.
  • Compliant with AS/NZS 4858 for internal wet areas
  • Fleece lined surface for strong adhesion to tiles and screeds
  • Compatible with ARDEX tile adhesives and liquid membranes
  • High resistance to tearing, cracking, bubbling and water absorption
  • Roll size 1.4m x 20m
  • Membrane thickness 0.75mm
  • Elongation greater than 300 percent
  • Tear resistance 26.5 kN per metre minimum
  • Tensile strength minimum 5.0 MPa
  • Service temperature range minus 30°C to 80°C
  • Water vapour transmission 0.21 g per square metre per 24 hours
  • Water absorption maximum 1.88 percent
  • Minimum 40mm overlaps with heat welded seams
  • Minimum 150mm floor to wall upturns
  • Suitable for flood testing after approximately 1 hour
Technical Data Sheet Safety Data Sheet

Need Technical Advice?

Not sure if this product is suitable for your project?

Our technical team provides independent advice on product selection, compatibility and waterproofing systems.

Independent product advice backed by real-world waterproofing experience.

Contact Technical Support
(07) 3667 9878

Monday–Friday
7:00 am – 3:00 pm AEST

Warehouse Stocked
Fast Australia-wide Delivery
Expert Technical Advice
Secure Checkout

Frequently Purchased Together

These popular picks are often added by trade professionals to complete their project kits.