Forspec

Forspec HiFlow Drainage Cell

Regular price
$311.00 USD
Sale price
$311.00 USD
Regular price
Shipping calculated at checkout.

Prices shown exclusive of GST.

Out of stock
Forspec HiFlow is a 15mm HDPE dimpled drainage sheet with a bonded non-woven geotextile filter. Installed over a cured waterproofing membrane, it forms a drainage cavity behind retaining and basement walls or beneath planter boxes, podium decks and green roofs. The geotextile faces the retained soil or growing medium to keep fines out of the cavity. Connect the sheet to a functioning drainage line and protect the membrane during installation and backfill. HiFlow is a drainage and protection layer, not a waterproofing membrane; the project specifier must verify drainage capacity and imposed loads.
  • Forms a drainage cavity over waterproofing
  • Geotextile helps filter soil fines
  • Protects the membrane during backfill

H2O AI Product Support

Technical and product guidance for the item you’re viewing.

  • 15 mm nominal HDPE dimpled core with bonded non-woven geotextile. Gross roll area 22.5 m². Drainage and membrane protection layer, not a waterproofing membrane.
  • Install over a cured, inspected membrane, flood tested where required. Confirm falls and outlet. Remove projections. Place dimples against membrane and geotextile towards retained material. Lap in direction of flow, keep filter continuous, and fix only above membrane termination. Inspect before controlled backfill.
  • HDPE with bonded non-woven geotextile; white; 15 mm nominal thickness; 15 m × 1.5 m roll; 22.5 m² gross; 37 kg roll. Performance figures are typical R&D values and require written Forspec confirmation for engineering design.

Applications

Retaining Wall
Planter Box
Podium
Below Ground

Frequently Asked Questions

What is HiFlow Drainage Cell used for?
It forms a drainage and protection layer over a cured waterproofing membrane behind retaining or basement walls and in planter boxes, podium decks and green roofs. It must discharge to a functioning drainage line.
Which way should the geotextile face?
Face the bonded geotextile towards the retained soil or growing medium, with the dimpled core against the waterproofing membrane. Keep the filter continuous across laps.
Is HiFlow a waterproofing membrane?
No. It drains and protects a separate waterproofing membrane. Install it only after the membrane has cured and been inspected and flood tested where required.
How much area does one roll cover?
A 15 m × 1.5 m roll has a gross area of 22.5 m². Net installed coverage is lower after laps, cuts and terminations.
Can its flow and compressive figures be used for drainage design?
The TDS labels its performance figures as typical R&D characteristic values and calls for written Forspec confirmation before engineering design. The specifier must check flow capacity and imposed loads for the project.

Need Technical Advice?

Not sure if this product is suitable for your project?

Our technical team provides independent advice on product selection, compatibility and waterproofing systems.

Independent product advice backed by real-world waterproofing experience.

Contact Technical Support
(07) 3667 9878

Monday–Friday
7:00 am – 3:00 pm AEST

Warehouse Stocked
Fast Australia-wide Delivery
Expert Technical Advice
Secure Checkout

Frequently Purchased Together

These popular picks are often added by trade professionals to complete their project kits.