Grout Buster 3000 grout removal machine with integrated dust extraction hose
Grout Buster 3000 grout removal machine positioned on tiled floor
Grout Buster 3000 grout removal machine with integrated dust extraction hose
Grout Buster 3000 grout removal machine positioned on tiled floor
Grout Buster 3000 grout removal machine with integrated dust extraction hose
Grout Buster 3000 grout removal machine positioned on tiled floor
Innovative Tools Australia

Grout Buster 3000 Grout Removal Machine

$510.00 AUD
$510.00 AUD
Shipping calculated at checkout.

Prices shown exclusive of GST.

Online stock available
The Grout Buster 3000 is a powered, guided grout removal machine for removing failed grout from straight tile joints. Its 1200W motor runs at 9,000 RPM, while stainless steel guide wheels hold the diamond blade in line with the joint to reduce blade wandering across the tile surface.The machine provides forward and backward blade travel, a maximum cutting depth of 13.5mm and integrated vacuum extraction with a dust collection bag. It accepts 20mm-bore diamond blades in 1.2mm, 1.7mm, 2.2mm and 2.7mm thicknesses for cementitious grout, mortar and controlled epoxy removal.Best suited to long, straight floor and wall tile joints. Hairline joints under approximately 1.5mm, mosaics, tight or uneven joints, delicate tiles, internal corners and curves should be completed using suitable hand tools.
  • Guided blade alignment for straight grout joints
  • 1200W motor operating at 9,000 RPM
  • Integrated dust extraction at the cut
Calculating estimated delivery

H2O AI Product Support

Technical and product guidance for the item you’re viewing.
  • 1200W high-torque motor
  • 9,000 RPM motor speed
  • Stainless steel guide wheels keep the blade aligned in straight joints
  • Integrated vacuum extraction and dust collection bag
  • Forward and backward blade travel
  • Maximum cutting depth of 13.5mm
  • Accepts 20mm-bore diamond blades in four thicknesses
  • Select a compatible diamond blade that is narrower than the grout joint and set the cutting depth to avoid unnecessary contact with the substrate beneath the tile. Align the stainless guide wheels with a long, straight joint and make a controlled test cut in an inconspicuous area. Work progressively and use the integrated extraction system. Stop short of internal corners, curves and irregular joints and complete these areas by hand. Do not use on hairline joints under approximately 1.5mm, mosaics, tight uneven joints or delicate tiles. Use suitable eye, hearing and respiratory protection.
  • Motor power: 1200W high-torque
  • Motor speed: 9,000 RPM
  • Blade type: Diamond
  • Blade thicknesses: 1.2mm, 1.7mm, 2.2mm and 2.7mm
  • Maximum cutting depth: 13.5mm
  • Blade motion: Forward and backward
  • Guide wheels: Stainless steel
  • Dust extraction: Integrated vacuum and dust collection bag
  • Blade bore: 20mm
  • Power supply: 220V, 50Hz, single phase, corded
Technical Data Sheet

Complete Your System

  • Grout Buster 3000 grout removal machine with integrated dust extraction hose
    Current product Grout Buster 3000 Grout Removal Machine $510.00 AUD Available to order
  • ITA 100mm grout removal blade – 1.2mm width
    System component ITA Grout Removal Blades $50.00 AUD Available to order
System total

Applications

Bathroom
Internal Wet Areas

Common Applications

Common applications where this product is typically specified.

Grout Buster 3000 grout removal machine positioned on tiled floor

Straight Tile Joint Regrouting

Guided removal of failed grout from long, straight floor and wall tile joints.

Technical Specifications

Key technical properties of this product. Refer to the Technical Data Sheet for complete installation and performance information.

ClassificationCorded grout removal machine
Suitable SubstratesTiled floor and wall joints; brickwork and masonry surfaces
Recommended Joint WidthApproximately 2–6mm or greater, straight joints
Not Suitable ForHairline joints under ~1.5mm, mosaics, tight curves, internal corners or delicate tiles

Need Technical Advice?

Not sure if this product is suitable for your project?

Our technical team provides independent advice on product selection, compatibility and waterproofing systems.

Independent product advice backed by real-world waterproofing experience.

Contact Technical Support
(07) 3667 9878

Monday–Friday
7:00 am – 3:00 pm AEST

Warehouse Stocked
Fast Australia-wide Delivery
Expert Technical Advice
Secure Checkout

Frequently Purchased Together

These popular picks are often added by trade professionals to complete their project kits.