PENETRON
Penetron Peneseal Pro – Concrete Sealer 19L
- Regular price
- $824.50 AUD
- Sale price
- $824.50 AUD
- Regular price
-
Shipping calculated at checkout.
Prices shown exclusive of GST.
Online stock available
- Seals pores, capillaries and existing hairline cracks below the concrete surface.
- Remains active in the presence of water to seal future hairline cracks.
- Protects against water, chloride and sulfate ingress.
Couldn't load pickup availability
Overview & Features
- Protects against water, chloride and sulfate ingress
- Increases resistance to chemical attack and carbonation
- Sub-surface treatment does not peel, scratch or affect adhesion of subsequent compatible products
- Transparent, non-toxic, biodegradable and non-flammable
- Applied by low-pressure spray
Application Guide
- 1. Route out and repair honeycombs, voids and other surface damage with an appropriate repair mortar.
- 2. Confirm the concrete is at least 14 days old; 28 days is recommended. The surface must be clean, dust-free and dry, with formwork oils, curing compounds and previous treatments removed.
- 3. Apply only between 5°C and 35°C. Do not apply when rain is imminent or in heavy wind.
- 4. Flood cracks with undiluted Peneseal Pro RTU at approximately 1 L per 5 lineal metres.
- 5. Apply undiluted product to the full surface by low-pressure spray at 1 L per 4–6 m².
- 6. When dry to touch, normally 2–6 hours, flood the surface with abundant water.
- 7. Flood again 24 hours later, then complete a third flooding after another 24 hours.
- 8. After the third flooding, pond testing may be undertaken to verify waterproofing performance.
Specifications & Standards
- Product type: Ready-to-use reactive penetrating concrete sealer
- Colour: Transparent
- Specific gravity: 1.23
- Coverage: 4–6 m²/L; nominal 5 m²/L on normal concrete
- Crack treatment: Additional 1 L per 5 lineal metres
- Application temperature: 5°C to 35°C
- Concrete age: Minimum 14 days; 28 days recommended
- Dry to touch: 2–6 hours before first water curing
- Trafficable: Within 6 hours after first water curing
- Packaging: 19 L pail; 208 L drum; 1041 L tote
- Shelf life: 2 years in sealed containers
- Properties: Non-toxic, biodegradable and non-flammable
- EN 1504-2: Protection against penetration Class 1.2 (I); increasing physical resistance Class 5.2 (I)
- EN test data: Capillary water absorption Class II; impact strength Class III (20 Nm); pull-off bond strength 0.8 N/mm²; penetration depth 5 mm
- Manufacturer warranty: Free from material defects and compliant with formulation standards; liability limited to replacement of proven defective material
Product Documents
Applications
Podium
Terrace
Rooftop
External Waterproofing
Exposed Finish
Positive Waterproofing
Technical Specifications
Key technical properties of this product. Refer to the Technical Data Sheet for complete installation and performance information.
| Classification | EN 1504-2 Classes 1.2 (I) and 5.2 (I) |
|---|---|
| Mixing Ratio | Ready to use; do not dilute |
| Coverage | 4–6 m²/L; nominal 5 m²/L |
| Recommended Coats | One application with three-stage water curing |
| Suitable Substrates | Clean, dry concrete at least 14 days old; 28 days recommended |
| Internal / External Use | External exposed concrete |
| Packaging | 19 L pail; 208 L drum; 1041 L tote |
| Storage | Keep sealed, away from heat and direct sunlight; do not freeze |
Need Technical Advice?
Not sure if this product is suitable for your project?
Our technical team provides independent advice on product selection, compatibility and waterproofing systems.
Independent product advice backed by real-world waterproofing experience.
Contact Technical Support
(07) 3667 9878
Monday–Friday
7:00 am – 3:00 pm AEST
Frequently Purchased Together
These popular picks are often added by trade professionals to complete their project kits.