WMA

WMA Aquastatic Epoxy – Water-Based Primer 20L Kit

$310.00 AUD
$310.00 AUD
$337.50 AUD
Shipping calculated at checkout.

Prices shown exclusive of GST.

Online stock available
WMA Aquastatic Epoxy is a two-part, water-based epoxy primer and moisture barrier designed to enhance adhesion and protect concrete substrates. It provides a tough, durable, and waterproof coating that can
Calculating estimated delivery

H2O AI Product Support

Technical and product guidance for the item you’re viewing.
  • Solvent-free, non-flammable, and low odour
  • Fast curing with easy water clean-up
  • Provides a waterproof and vapour-resistant barrier
  • Can be applied by brush, roller, or spray
  • Ideal as a primer under membranes or coatings
  • Resistant to oils, petrol, and mild chemicals
  • Appearance: Grey semi-gloss (tends to matt with age)
  • Type: Two-part water-based epoxy coating
  • Mix ratio: 1:1 by volume (Part A : Part B)
  • Solids: ~50%
  • Coverage: Approx. 3 m²/L per coat (two coats recommended)
  • Film build: Approx. 0.3 mm DFT total (two coats)
  • Pot life: 30–40 minutes at 23 °C
  • Recoat time: 4–6 hours at 23 °C
  • Full cure: 7 days
  • Application temperature: 10–35 °C
  • Packaging: 5 L and 15 L kits (Part A + Part B)
  • Clean-up: Warm water and mild detergent while wet
  • Storage: Store in a cool, dry place out of direct sunlight
  • UV stability: Contains UV protection additives but may yellow with prolonged exposure

Need Technical Advice?

Not sure if this product is suitable for your project?

Our technical team provides independent advice on product selection, compatibility and waterproofing systems.

Independent product advice backed by real-world waterproofing experience.

Contact Technical Support
(07) 3667 9878

Monday–Friday
7:00 am – 3:00 pm AEST

Warehouse Stocked
Fast Australia-wide Delivery
Expert Technical Advice
Secure Checkout

Frequently Purchased Together

These popular picks are often added by trade professionals to complete their project kits.