DURAM
Duram Resiflex FC PU Sealant 600mL
- Regular price
- $10.50 AUD
- Sale price
- $10.50 AUD
- Regular price
-
Shipping calculated at checkout.
Prices shown exclusive of GST.
Online stock available
- Provides 25% movement capability for flexible construction joint sealing.
- Fast cure develops a skin in approximately 45 minutes at stated conditions.
- Compatible with Duram waterproofing membranes when correctly cured.
Couldn't load pickup availability
Overview & Features
- Excellent adhesion to listed construction substrates
- Compatible with Duram waterproofing membranes
- Paintable after curing, subject to preliminary testing
- Tools off easily while wet
- Applied as a continuous bead using a sausage applicator gun
Application Guide
- Apply to sound, stable, dry and clean substrates. Complete a field adhesion test and prime only where required. Extrude a continuous strip with enough pressure to fill and seal the joint, crack, corner or gap. Form corner fillets at least 10mm along both surfaces at 45 degrees. Allow the product to skin before applying Multithane or Duram 195, and allow it to fully cure before applying water-based membranes.
Specifications & Standards
- Technology: Fast-cure, flexible, high-modulus polyurethane construction sealant
- Colour: Grey
- Packaging: 600mL sausage; 20 per carton
- Application temperature: 5°C to 40°C
- Service temperature: -20°C to 80°C
- Specific gravity: 1.30
- Shore A hardness: 35–40
- Modulus at 100%: 0.35–0.45MPa to ISO 8339
- Elongation at break: 250% to ISO 8339
- Resistance at break: 0.6MPa to ISO 8339
- Movement capability: 25%
- Elastomeric recovery: >70% to ISO 7389
- Skin formation: Approx. 45 minutes at 23°C and 50% RH
- Cure rate: >3mm per 24 hours at 23°C and 50% RH
- Shelf life: Up to 12 months in unopened, undamaged packaging
Product Documents
Complete Your System
-
Current product Duram Resiflex FC PU Sealant 600mL $10.50 AUD In stock -
Primeseal MC Hydrostatic Epoxy Barrier Primer
Applications
External Waterproofing
Technical Specifications
Key technical properties of this product. Refer to the Technical Data Sheet for complete installation and performance information.
| Classification | Fast-cure, high-modulus, single-component polyurethane construction sealant |
|---|---|
| Mixing Ratio | Single component; no mixing required |
| Coverage | Approx. per 600mL: 36m at 4×4mm; 25m at 6×4mm; 16m at 6×6mm; 19m at 8×4mm; 12m at 8×6mm; 9m at 8×8mm; 12m at 12×4mm; 8m at 12×6mm; 6m at 12×8mm; 5m at 12×10mm |
| Suitable Substrates | Concrete, cement, terracotta, earthenware, anodised aluminium, most metals, timber, brick and blockwork |
| Storage | Store in a cool, dry area and protect from damage and air exposure |
| Exposure Limitation | Not designed for long-term direct exposure to sunlight |
Need Technical Advice?
Not sure if this product is suitable for your project?
Our technical team provides independent advice on product selection, compatibility and waterproofing systems.
Independent product advice backed by real-world waterproofing experience.
Contact Technical Support
(07) 3667 9878
Monday–Friday
7:00 am – 3:00 pm AEST
Frequently Purchased Together
These popular picks are often added by trade professionals to complete their project kits.