Stellmann Primer/Sealer 1 L water-based add-on for Non-Slip Clear PRO
Stellmann Primer/Sealer 1 L water-based add-on for Non-Slip Clear PRO
Stellmann

Stellmann Primer/Sealer 1L – Non-Slip Clear Add-On

$73.50 AUD
$73.50 AUD
Shipping calculated at checkout.

Prices shown exclusive of GST.

Online stock available
Stellmann Primer/Sealer is a water-based adhesion primer supplied as a 1 L add-on for Stellmann Non-Slip Clear PRO systems. Every standard Stellmann kit already includes the required primer; this separate
  • Extends the primer quantity supplied in a standard Stellmann kit when extra project area is identified.
  • Supports adhesion between a correctly prepared substrate and the compatible Stellmann coating.
  • The 1:1 water dilution enables controlled, thin-film application.
Calculating estimated delivery

H2O AI Product Support

Technical and product guidance for the item you’re viewing.
  • Allow approximately 30 minutes to cure at room temperature.
  • Avoid puddling and contamination of the primed surface.
  • This primer is a system component and not a standalone waterproofing membrane.
  • 1. Confirm the substrate is suitable for the Stellmann Non-Slip Clear PRO system.
  • 2. Clean and dry the surface; remove contaminants, loose material and unbonded coatings.
  • 3. Confirm existing coatings are firmly bonded and complete an adhesion test where compatibility is uncertain.
  • 4. Do not apply over nano or repellent surface treatments.
  • 5. Dilute the primer 1:1 with clean water.
  • 6. Apply a thin, uniform film using a sponge or flat microfibre mop or cloth; avoid puddling.
  • 7. Keep the primed surface clean and wear shoe covers if access is required.
  • 8. Allow approximately 30 minutes to cure at room temperature before applying the compatible Stellmann coating.
  • Pack size: 1 L bottle.
  • Technology: Water-based primer/sealer.
  • Dilution: 1 part primer to 1 part clean water.
  • Application: Sponge or flat microfibre mop or cloth.
  • Cure: Approximately 30 minutes at room temperature.
  • Coverage: Not stated; varies with substrate porosity, texture, application method and site conditions.
Technical Data Sheet Safety Data Sheet – Part B

Complete Your System

System total

Technical Specifications

Key technical properties of this product. Refer to the Technical Data Sheet for complete installation and performance information.

ClassificationWater-based system primer/sealer
Mixing Ratio1 part primer to 1 part clean water
CoverageNo fixed m² stated; practical spreading rate varies with porosity, texture, method and site conditions
Recommended CoatsOne thin, uniform application; avoid puddling
Recoat TimeApproximately 30 minutes at room temperature before compatible Stellmann coating
Suitable SubstratesPrepared substrates compatible with Non-Slip Clear PRO, including tiles, ceramics, stone, fibre cement, concrete, timber, metal and glass
Internal / External UseInterior and exterior use within the compatible Stellmann Non-Slip Clear PRO system
Existing Coating Hold PointExisting coatings must be firmly bonded; complete an adhesion test if compatibility is uncertain
Repellent Treatment LimitationDo not apply over nano or repellent surface treatments
View Technical Data Sheet

Need Technical Advice?

Not sure if this product is suitable for your project?

Our technical team provides independent advice on product selection, compatibility and waterproofing systems.

Independent product advice backed by real-world waterproofing experience.

Contact Technical Support
(07) 3667 9878

Monday–Friday
7:00 am – 3:00 pm AEST

Warehouse Stocked
Fast Australia-wide Delivery
Expert Technical Advice
Secure Checkout

Frequently Purchased Together

These popular picks are often added by trade professionals to complete their project kits.